© 2017 China Inter-Trade Alliance Ltd. / Dongguan Shamana Trade Co., Ltd.

© 2017 中国国际贸易联盟有限公公司 / 东莞夏玛娜贸易有限公司

  • Facebook - Grey Circle
  • LinkedIn - Grey Circle
  • Google+ - Grey Circle

地址:中国广东省东莞石龙西湖区电站路25-29号5楼

Addres: D/18F, Thomson Commercial Building, Thomson Road, Wan Chai, Hong Kong

Contact:  CN        +86-18688611140 /18688623632

                             trade.alliance@foxmail.com

                RO        +40-753305288

                             mirceadhanu@gmail.com

© all rights reserved

STAMPING AUTOMATION EQUIPMENT

High-quality automatic equipment which is easy to operate and maintain. It can combine with the press lines, cut to length lines and stamping systems for coil materials of all manufacturers

 

DONGGUAN SHAMANA CO., LTD.

Time-saving, space-saving and labor-saving features embody the high economical use of our products.

DONGGUAN SHAMANA CO., LTD.

Time-saving, space-saving and labor-saving features embody the high economical use of our products.

 

PRESS FEEDER

HIGH SPEED ROLL FEEDER RFS SERIES

  • Model: RFS

  • Place origin: China

  • Warranty date: 1 year

  • Installation and debugging: Engineers onsite technical support is available.

  • Package: plywood case/film

  • Price terms: FOB SHENZHEN or other Chinese port etc.

  • Payment terms: T/T, L/C etc.

  • MOQ: 1 set

  • Delivery: 30-60 days

  • Application: to realize metal coil automatic punching/cut to length/blanking etc., widely used for working with punch press /power press /press brake/ hydraulic press machine/shearing machine etc.

Introduction​​

Unilateral bearing
Enchased cemented carbide alloy, and equip with roller bearing, it have good abrasive resistance, stability, accuracy and long lifetime. The gear is hardened to HRC60 after heat treatment and grounded to the best transmission accuracy.

Roller
We adopt hollow type roller as it is light and low inertia, it can stop immediately, ensure the precision of feeding.
After being heated treatment HRC60°. Chroming and grinding, so the roller has high hardness, good abrasive resistance and and long lifetime.

Disk Brake
Apply best brake lining disc for best accuracy, durability and stability.

The reversing device
     a. The structure is same as unilateral bearing. It can control the down roller accurately and prevent the roller reversing even for long time. Thus it can improve the stability and accuracy.
     b. The brakes will not out of control by the splashed waste oil with the anti-reversing device. Generally the waste oil will cause the down roller reverse when the press machine is punching.
     c. It will not cause high heat.
     d. it applied hard alloy and roller to make sure the good abrasive resistance.
     e. movement method and ball are doing circular motion , not straight movement of 4 pillar, so it will not appear lock phenomenon.
     f. small friction force, make the related transmission twisting force decreasing, driver construction is not easy to be broken.
     g. special construction increase the working life.

Precision 

The accuracy can meet 0.05mm, basis on the different feeding length of stock and strokes. If it has the guide pin for location, the accuracy can be better to ±0.01mm.

Type

Single type: It is suitable for thick material (thickness is above 0.15mm), single process punching or multi-process punching products.

Multiple-ytpe: It is suitable for the thin material (thickness is lower 0.15mm), single process punching products, as metal sheet, plates and so on.                                          

Advantage

1. High productivty: Continuous process is available.

2. High speed: It can approach 600 strokes per minute.

3. Universality: It can be used for different width and thickness material, only need to adjust the feeder to match with moulds.

4. It adopts simple structure, economoical, easy maintenance and less trouble. 

PRESS FEEDER

SMALL-SIZED SERVO ROLL FEEDER-MECHANICAL RELEASE NCF SERIES

  • Model: NCF-100/NCF-200/NCF-300/NCF-400

  • Place origin: China

  • Warranty date: 1 year

  • Installation and debugging: Engineers onsite technical support is available.

  • Package: plywood case/film

  • Price terms: FOB SHENZHEN or other Chinese port etc.

  • Payment terms: T/T, L/C etc.

  • MOQ: 1 set

  • Delivery: 30-60 days

Introduction​​

1. Suit for most of sheet and strip of material, such as HR, CR, aluminum, stainless steel, copper, PVC etc.

2. Apply to high speed feeding, long stroke length feeding, significantly improves productivity and feeding accuracy (within±0.03mm).

3. User-friendly operation panel makes it easier to input amount of feeding length directly. The range of feeding length is from 0.1mm to 9999.99mm.

4. Input 20 sets of different feeding length. Each group provides stamping for 999 times to satisfy the processing and production of special products (option).

5. Manual mode: It is available to input 3 phases manual speed so that users operate easily and freely.

6. Job storage provides maximum flexibility and reduced set-up time.

7. All high-hardness and anti-friction rolls are made from heat-treated alloy steel with hard chrome plating and precision ground. The hardness is up to HRC60.

8. Feeding rolls are power driven through a precision gear train.

9. Servo feeder is generally divided into two categories: pneumatic servo feeder and mechanical servo feeder. The feeding principle of these two feeders is exactly the same; the difference is how to achieve the release action. Our engineers can analyze your application to determine mechanical release or pneumatic release.

10. Set up release angle quickly.

11. All electrical components are from advanced worldwide famous brands, such as Siemens, Yaskawa, Mitsubishi, Schneider etc. stable and efficient.

12. Simple but rugged construction allows a longer lifetime, easy in installation and maintenance.

13. NCF models can combine with the press lines, cut to length lines and stamping systems for coil materials of all manufacturers.

14. Custom and application specific solution is available.

PRESS FEEDER

SMALL-SIZED SERVO ROLL FEEDER-PNEUMATIC RELEASE NCF SERIES

  • Model: NCF-100/NCF-200/NCF-300/NCF-400

  • Place origin: China

  • Warranty date: 1 year

  • Installation and debugging: Engineers onsite technical support is available.

  • Package: plywood case/film

  • Price terms: FOB SHENZHEN or other Chinese port etc.

  • Payment terms: T/T, L/C etc.

  • MOQ: 1 set

  • Delivery: 30-60 days

Introduction​​

1. Suit for most of sheet and strip of material, such as HR, CR, aluminum, stainless steel, copper, PVC etc.
2. Apply to high speed feeding, long stroke length feeding, significantly improves productivity and feeding accuracy (within±0.03mm).
3. User-friendly operation panel makes it easier to input amount of feeding length directly. The range of feeding length is from 0.1mm to 9999.99mm.
4. Input 20 sets of different feeding length. Each group provides stamping for 999 times to satisfy the processing and production of special products (option).
5. Manual mode: It is available to input 3 phases manual speed so that users operate easily and freely.
6. Job storage provides maximum flexibility and reduced set-up time.
7. All high-hardness and anti-friction rolls are made from heat-treated alloy steel with hard chrome plating and precision ground. The hardness is up to HRC60.
8. Feeding rolls are power driven through a precision gear train.
9. Servo feeder is generally divided into two categories: pneumatic servo feeder and mechanical servo feeder. The feeding principle of these two feeders is exactly the same; the difference is how to achieve the release action. Our engineers can analyze your application to determine mechanical release or pneumatic release.
10. Set up release angle quickly.
11. All electrical components are from advanced worldwide famous brands, such as Siemens, Yaskawa, Mitsubishi, Schneider etc. stable and efficient.
12. Simple but rugged construction allows a longer lifetime, easy in installation and maintenance.
13. NCF models can combine with the press lines, cut to length lines and stamping systems for coil materials of all manufacturers.
14. Custom and application specific solution is available.

PRESS FEEDER

MEDIUM-SIZED SERVO ROLL FEEDER NCF SERIES

  • Model: NCF-400/NCF-500/NCF-600/NCF-700/NCF-800

  • Place origin: China

  • Warranty date: 1 year

  • Installation and debugging: Engineers onsite technical support is available.

  • Package: plywood case/film

  • Price terms: FOB SHENZHEN or other Chinese port etc.

  • Payment terms: T/T, L/C etc.

  • MOQ: 1 set

  • Delivery: 30-60 days

  • Application: to realize metal coil automatic punching/cut to length/blanking etc., widely used for working with punch press /power press /press brake/ hydraulic press machine/shearing machine etc.

Introduction​​

1. Suit for most of sheet and strip of material, such as HR, CR, aluminum, stainless steel, copper, PVC etc.
2. Apply to high speed feeding, long stroke length feeding, significantly improves productivity and feeding accuracy (within±0.03mm).
3. User-friendly operation panel makes it easier to input amount of feeding length directly. The range of feeding length is from 0.1mm to 9999.99mm.
4. Input 20 sets of different feeding length. Each group provides stamping for 999 times to satisfy the processing and production of special products (option).
5. Manual mode: It is available to input 3 phases manual speed so that users operate easily and freely.
6. Job storage provides maximum flexibility and reduced set-up time.
7. All high-hardness and anti-friction rolls are made from heat-treated alloy steel with hard chrome plating and precision ground. The hardness is up to HRC60.
8. Feeding rolls are power driven through a precision gear train.
9. Servo feeder is generally divided into two categories: pneumatic servo feeder and mechanical servo feeder. The feeding principle of these two feeders is exactly the same; the difference is how to achieve the release action. Our engineers can analyze your application to determine mechanical release or pneumatic release.
10. Set up release angle quickly.
11. All electrical components are from advanced worldwide famous brands, such as Siemens, Yaskawa, Mitsubishi, Schneider etc. stable and efficient.
12. Simple but rugged construction allows a longer lifetime, easy in installation and maintenance.
13. NCF models can combine with the press lines, cut to length lines and stamping systems for coil materials of all manufacturers.
14. Custom and application specific solution is available.

PRESS FEEDER

LARGE-SIZED SERVO ROLL FEEDER NCF SERIES

  • Model: NCF-1000/NCF-1300/NCF-1600

  • Place origin: China

  • Warranty date: 1 year

  • Installation and debugging: Engineers onsite technical support is available.

  • Package: plywood case/film

  • Price terms: FOB SHENZHEN or other Chinese port etc.

  • Payment terms: T/T, L/C etc.

  • MOQ: 1 set

  • Delivery: 30-60 days

  • Application: to realize metal coil automatic punching/cut to length/blanking etc., widely used for working with punch press /power press /press brake/ hydraulic press machine/shearing machine etc.

Introduction​​

1. All feed rolls are made of 40Cr, finished fine machining, heat treated, hard chrome plated and grind. Hardness is up to HRC58°~60°
2. Feed rolls are power driven through a precision gear train.
3. High-precision feed: NCF models are controlled by computer closed-circuit feedback system, so the feed precision is within +/-0.03mm.
4. Phase-style feed function: It is available to input 20 groups of different feed length, each group provides punching for 999 times to satisfy the processing and production of special products (option).
5. Manual model: It is availabe to input 3 phases manual speed so that users operate more easily and feed materials more accurately.
6. High-efficiency release device: NCF models can set up release angle quickly, only mact CAM signal of and adjusted feed thickness can done.
7. Feed length set up: Input feed length on the control screen directly.

PRESS FEEDER

DOUBLE-ROLLS SERVO ROLL FEEDER NCFD SERIES

  • Model: NCD

  • Place origin: China

  • Warranty date: 1 year

  • Installation and debugging: Engineers onsite technical support is available.

  • Package: plywood case/film

  • Price terms: FOB SHENZHEN or other Chinese port etc.

  • Payment terms: T/T, L/C etc.

  • MOQ: 1 set

  • Delivery: 30-60 days

Introduction​​

1. Compared with normal servo feeder, NCFD models that are equipped with 4 feed rolls and 4 big air cylinders are extremely suitable for thick metal plate.

2. All feed rolls are made of 40Cr, finished fine machining, heat treated, hard chrome plated and grind. Hardness is up to HRC58°~60°

3. Feed rolls are power driven through a precision gear train.

4. All main electronic components come from world wide famous brands with CE CERTIFICATION.

5. High-precision feed: NCFD models are controlled by computer closed-circuit feedback system, so the feed precision is within +/-0.03mm.

6. Phase-style feed function: It is available to input 20 groups of different feed length, each group provides punching for 999 times to satisfy the processing and production of special products (option).

7. Manual model: It is availabe to input 3 phases manual speed so that users operate more easily and feed materials more accurately.

8. High-efficiency release device: It can set up release angle quickly, only mact CAM signal of and adjusted feed thickness can done.

9. Feed length set up: Input feed length on the control screen directly.

PRESS FEEDER

SERVO ZIGZAG FEEDER NCZ SERIES

  • Model: NCZ

  • Place origin: China

  • Warranty date: 1 year

  • Installation and debugging: Engineers onsite technical support is available.

  • Package: plywood case/film

  • Price terms: FOB SHENZHEN or other Chinese port etc.

  • Payment terms: T/T, L/C etc.

  • MOQ: 1 set

  • Delivery: 30-60 days

  • Application: to realize metal coil automatic punching/cut to length/blanking etc., widely used for working with punch press /power press /press brake/ hydraulic press machine/shearing machine etc.

Introduction​​

1. High productivity: It can finish many times shift. It can save 7% material in every move, basis on the canlculation of the 60° corner. It will change the corner distribution according to the width of material that can increase the material utilization.

2. High efficiency: The feeding speed can meet 60times/min. 

3. High precision: In the process of continuous punchm it can set the min. Distance between both sides withwin 0.5mm; the error of every move can make sure within ±0.08mm.

4. Cover the space is little, the energy consumption is low.

5. The product will drop out on the conveyor after the punched, and then will send to  the material platform by the conveyor.

6. Complete automation control, can save labor resource: When the production line working, it just need one staff to operate the electric box. Input the operational program on the manual panel, the machines can complete automatic produce.

PRESS FEEDER

PRESS FEEDER FOR KITCHENWARE STAMPING LINE

  • Model: Zigzag servo press feeder

  • Place origin: China

  • Warranty date: 1 year

  • Certification: CE

  • Installation and debugging: Engineers onsite technical support is available.

  • Package: plywood case/film

  • Price terms: FOB SHENZHEN or other Chinese port etc.

  • Payment terms: T/T, L/C etc.

  • MOQ: 1 set

  • Delivery: 30-60 days

  • Application: to realize metal coil automatic punching/cut to length/blanking etc., widely used for working with punch press /power press /press brake/ hydraulic press machine/shearing machine etc.

Introduction

PRESS FEEDER FOR KITCHENWARE STAMPING LINE is built for blanking KITCHENWARE STAMPING from coil with the aim of reducing the scrap quantity by exploiting the whole width of the coil.

SCRAP REDUCTION
At first, kitchenware stamping line has been designed TO EXPLOIT THE WHOLE WIDTH OF THE COIL, reducing to the minimum distance to the strip edges,with a consequent REDUCTION OF THE SCRAP QUANTITY. Generally, we use 2mm as the distance. This reduction is realized avoiding the use of expensive and low flexible multiple dies.

AVOID ANY FURTHER WORKING PHASE
Since feeder for kitchenware can blank the whole width of the strip, with this technology is therefore possible TO REDUCE FURTHER WORKING PHASES, such as the reduction of the coil into coils of smaller width (=slitting),then save further costs and the possibility of damaging the coil surface (especially with aluminum ). This mostly applied in press feeder for kitchenware and rotor and stator automatic stamping etc.

FLEXIBILITY
LOW DOWN TIMES: when change the production size (diameter), only change die and change the setting of the HMI.
WIDE PRODUCTION RANGE: the same line can blank different material, without any change or modification. The disk layout setting in the strip is no limit. Any punching path can be set by user.

CHINA INTER-TRADE ALLIANCE LTD.

中国国际贸易联盟有限公司